We often see a variety of acrylic display stands when shopping. These acrylic display stands are carefully crafted by acrylic display manufacturers.
As for the acrylic display frame production partners, it should be known that the acrylic display stand is a relatively high quality one in plexiglass and has been widely used. However, many small partners now do not know the manufacturing process of the acrylic display stand. As a professional acrylic display manufacturer, we will introduce you to several production processes today.
Acrylic display rack production process:
The first is to cut the acrylic display frame into a certain shape and then paste it on the plane. Whether it is cutting or pasting, there are high technical requirements. This is the first one.
Hot pressing method:
The second type needs to first make a hot stamping die according to the design drawing, and more use wood and sludge to shape the shape, and then use the cast lead and gypsum material as the male and female mold. After the acrylic sheet is heated, it is hot pressed in the mold. How much of the finished product depends on the quality of the mold to a large extent, the finished product is compacted by a good mold, the curve is smooth, the stereoscopic effect is strong, and the effect of relief is obtained.
The third type is to heat the acrylic display stand and quickly make it by hand. This method is required to be completed by an experienced and agile master. Separated from the molding machine, it is made by hand, and the finished product is simple and rough, and is used for the decoration of the display frame.
The latter one is based on the design drawing, using a laser cutting machine to cut the plate-shaped acrylic display stand of different colors into the required geometry, and inlay the splicing on the bottom plate. This method is convenient for transportation and customers can assemble it themselves.
The production process of the acrylic display rack is mainly composed of the pasting method, the hot pressing method, the hot pressing method and the setting method. Ok, let's talk about it today. If you want to know more, you can keep an eye on our website or call our hotline.